Magura Model 307
Throttle for single cable, straight
pull linkage, easy cable attachment with trap door cover, polished alloy
housing, adjusting screw for twist regulation, rubber cable protection
cover, black grip included. Includes 2 solder nipples and protection
cover. Total stroke 44 mm at a rotation of 140° (5/8 turn). For 7/8”
handlebars. Also available with a built in switch popular for nitrous
oxide activation or to start timing cycles.
0550615
Magura Aluminum Throttle, with single grip
(left grip available below)
1-0068
Switched Throttle Assembly
1-0072
Replacement Throttle Switch
Magura Model 314
Throttle for single
cable, parallel pull. The throttle cable is routed over a roller for
ease of pull. Features a black reinforced poly carbon housing and quick
and easy cable change without removing housing. Rubber cable cover is
included. Grip not included. Total stroke is 48mm at a rotation of 103°-
91°. (adjusts from 1/4 to 7/8 turn) For 7/8” handlebars.
0226385
0226385
Magura 314 throttle, grip not included
(grips available below) timing cycles.
Model 314 as shown above
but includes cable for Mikuni Radial Flat Slide carburetors. Single
cable is 42” long. For 7/8” diameter bars.
MTC1
Magura Throttle assembly with cab
PE96
Cable only
Replacement Grips
0417440
Right Hand Throttle Grip (fits Magura
model 305 & 314 throttles)
0417460
Left Hand Grip (Sold separately to match
Magura Throttle and grip.)
Magura Model 307
Throttle for single cable, straight
pull linkage, easy cable attachment with trap door cover, polished alloy
housing, adjusting screw for twist regulation, rubber cable protection
cover, black grip included. Includes 2 solder nipples and protection
cover. Total stroke 44 mm at a rotation of 140° (5/8 turn). For 7/8”
handlebars. Also available with a built in switch popular for nitrous
oxide activation or to start timing cycles.
Magura Model 314
Throttle for single
cable, parallel pull. The throttle cable is routed over a roller for
ease of pull. Features a black reinforced poly carbon housing and quick
and easy cable change without removing housing. Rubber cable cover is
included. Grip not included. Total stroke is 48mm at a rotation of 103°-
91°. (adjusts from 1/4 to 7/8 turn) For 7/8” handlebars.
Model 314 as shown above
but includes cable for Mikuni Radial Flat Slide carburetors. Single
cable is 42” long. For 7/8” diameter bars.
